Neware official guide on how to start to use Neware BTS4000

This article will introduce the quick guide of how to start to use Neware BTS4000 series when you receive Neware’s battery testers.

There are several steps in following part. Just follow it. Let’s begin now.

Step 1: Hardware installation

1.To usual device, connect Computer(server), Middle machine and Testers by using cable in order(Figure 1). Firstly, connect Computer(server) and Middle machine via TCP/IP port. Secondly, connect Testers and Middle machine via RS-485 port. Lastly, connect all Testers one by one via RS-485 port if you have more than one tester. To high power device, you only need to connect the tester and Computer(server) via TCP/IP port because the middle machine is combined with tester (Figure 2).

                                                                                                                Figure 1: Physical connection of computer, middle machine and tester

Figure 2: High power device

2. Connect battery, clamp and universal holder in order(Figure 3). Make Sure the polarities are matched correctly. Then, start up the computer, middle machine and testers. Figure 4 shows the explanation of tester’s detail.

Figure 3: connect battery clamp and testers

Figure 4: Detail of tester

Step 2: Middle machine set-up

1. Enter the Configuration and change Get IP Address from AUTO to MANUAL.

2.Setting the LP and SP in the same network segment (Here, the only difference is last number, you can set any number between 2-255).

Step 3: Computer (Server) Set-up

1.Go to Network and Sharing center, click Change adapter settings.

2.Right Click Local Connectivity and Choose Properties.

3. Double Click TCP/ IPv4.

4. Set up the IP address.

Step 4: BTS client software installation

There are three parts needed to install in the installation: Microsoft Visual C++ 2015 Redistributable (x86), BTSClient, BTSServer.

1.Download the installation package. Please click here:

2.Detail of installation is following here, just follow the guide.

Step 5: Operating Instruction of BTSClient Sofware

1.User Login. Name: admin; Password: neware.

2.Channel mapping

3.Set up steps

4.Explanation of steps

5.Setting up the steps

6.Testing

7. View and export data